G-Guard 5307G Load Arrester

Previous Model 807G

1,100 Pound Safe Working Load

  • G-Guard 5307G Load Arrester
  • G-Guard 5307G Load Arrester

The Load Halt G-GUARD 5307G load arrester automatically arrests the fall of heavy and valuable equipment. Offers protection to personnel and equipment below in the event that the primary lift hoist or suspension support fails.

The G-GUARD 500 series will arrest up to 1,100 pounds. Units are available with 23 to 61 feet of retractable steel cable.

This model is CE certified, and carries the CE mark. Protect your vulnerable equipment, and safeguard your employees against tragic accidents with a Load Halt load arrester.

G-Guard 5307G Operation

  • The G-Guard cable should run directly to the load and should not pass over any other cable.
  • The G-Guard cable should not become slack. The anchor point must be above the G-Guard. The anchor point should be of such construction that it can withstand a shock load of 2500 KG (5,511 pounds).
  • Allow 0.6 to 1.0 meters (2-3 feet) distance below the load for the G-Guard to arrest the load.

G-Guard 5307G Load Arrester Installation

  • The G-Guard should be placed as near as possible to the main supporting agent so as to reduce swing in the event of a failure of the main supporting agent.
  • The G-Guard cable should run parallel to the rope of the main supporting agent.
  • If a load is centrally supported then multiple G-Guards of a maximum working load may be used.


G-Guard 5307G Load Arrester


If a load is centrally supported then multiple G-Guards of a maximum working load may be used.

G-Guard 5307G Load Arrester

G-Guard 5307G Load Arrester Specifications

G-Guard 5307G Load Arrester

Please contact Load Halt today.